There is a solenoid valve in hydraulic press machine, which is mainly used to allow the hydraulic oil to enter different oil discharge pipes, so as to push the cylinder to act, and then realize mechanical movement, and can be effectively controlled. Therefore, in the solenoid valve, there will be an electromagnet and a magnet coil to realize the current on/off.
In the process of operating the hydraulic press machine, following are also some safety tips:
1. The working voltage should not be too high, otherwise it will damage the machinery and equipment.
2. When the equipment is running, the operator can not put his hands or tools deep into the jaws of the mold, which is very dangerous and easy to cause accidents.
3. If the mold is to be replaced, it should be carried out in the state of power-off of the equipment.
4. If there is an abnormality in the operation of the equipment, it should be stopped immediately for inspection without the slightest delay, so as not to cause more serious consequences.
+86-13509801050
E-mail
