1. The hydraulic press personnel should have the corresponding qualifications and must hold the certificate to work. It is forbidden for those who do not know the machine to open the hydraulic press.
2. Wear labor protection equipment before class.
3. Check the following types before starting: whether the photoelectric protection device is reliable. Whether each limit switch is sensitive. Whether the fasteners are loose.
4. Remove the sundries on the worktable and the mold, adjust the working pressure and the stroke of the roller, and leave it open for one to two minutes, and it can work only after everything is normal.
5. The adjustment rocker on the machine has been properly adjusted at the factory, and non-adjustment personnel are not allowed to adjust it at will.
Maintenance System of Hydraulic Press Machine
1. Lubricate and maintain according to the lubricating standard of the hydraulic press.
2. After the machine tool works every year, the hydraulic oil should be released from the oil tank of the bed body, the oil tank should be cleaned, and the filtered hydraulic oil should be refilled. The amount of oil should be determined at 3/4 of the oil level.
3. The oil filter net on the oil suction pipe must be cleaned or cleaned regularly.
4. Regularly check whether the joystick, knob, and buttons are damaged.
5. The motor must be kept clean, and the air inlet mesh cover of the motor must always be well ventilated and cannot be blocked.
6. Lubricate, scrub and clean the machine tool 10 minutes before leaving get off work every day.
7. It is forbidden for non-operators to operate this equipment, usually people must leave the machine to stop.
- hydraulic press machine
Tags :
+86-13509801050
E-mail
